Alcor Micro Unknown Fa00 F W 3613 Updated Fix May 2026

Subject: Firmware Update Notification – Alcor Micro FA00 (F/W 3613)

Overview: A new firmware update has been identified for the Alcor Micro controller (Model: Unknown FA00). The device has been successfully updated to Firmware Version 3613.

Update Details:

Notes: This update addresses the previous "unknown" device status, ensuring the controller is correctly recognized by the host system. Users running older versions are advised to update to build 3613 to maintain optimal stability and compatibility.


If you were looking for a shorter, more casual version for a chat or status update:

"Successfully updated the Alcor Micro controller (Unknown FA00) to F/W 3613. The device is now recognized and working correctly." alcor micro unknown fa00 f w 3613 updated

The proper driver piece (software) for the device string "alcor micro unknown fa00 f w 3613 updated" is the Alcor Micro USB Card Reader Driver.

This device ID usually corresponds to a built-in SD Card Reader or MMC controller commonly found in laptops (particularly models from Acer, Asus, and Dell).

Here is how to identify and install the correct piece:

Alcor Micro Unknown FA00 F/W 3613 Updated: A Comprehensive Troubleshooting and Analysis Guide

Date: October 2023 (Updated Analysis) Target Device: USB Mass Storage / Multi-Card Reader Key Identifiers: Vendor ID 058F (Alcor Micro), Product ID 3613, Firmware Version FA00, Hardware Revision F/W 3613

If you have arrived at this article, you are likely staring at a device manager screen showing the cryptic string "Alcor Micro Unknown FA00 F/W 3613" (sometimes labelled as "Unknown Device" or with a yellow exclamation mark). You have been searching for the "updated" version of drivers or firmware, or perhaps you just bought a cheap USB 3.0 card reader that refuses to work. Subject: Firmware Update Notification – Alcor Micro FA00

This article covers everything you need to know about this specific chipset: what it is, why it fails, the "updated" firmware mystery, how to fix common errors, and where to find legitimate drivers in 2024-2025.

Step 1: Driver Preparation (Critical)

Windows will try to use its generic driver for the FA00 device. This will block AlcorMP.

✅ Step 2 — Install the correct driver

Try these sources:

  1. Alcor Micro official — though they rarely provide public drivers.

  2. Your PC/laptop manufacturer’s support site (if it’s a built-in reader). Notes: This update addresses the previous "unknown" device

  3. Driver from generic card reader packs — sometimes the Microsoft CCID driver works.

    • Go to Device Manager → Update driver → Browse → Let me pick → Smart card readersMicrosoft Usbccid Smartcard Reader (WUDF).
  4. Gemalto / Safenet drivers — if this is for an eToken or ID card reader.


Overview — Alcor Micro “Unknown FA00 F W 3613 Updated”

Step 3: The Unlock Sequence

Because the firmware is 3613, the controller is likely password-locked in production.

What Does Each Part Mean?

| Field | Meaning | |-------|---------| | Alcor Micro | The controller manufacturer (common in budget/off-brand USB drives). | | Unknown | The chip detection tool couldn’t identify the exact controller model. | | FA00 | Likely the USB Vendor ID (VID) / Product ID (PID) or a short chip code. | | F/W 3613 | Firmware version 3613 (critical for matching correct量产工具 – mass production tool). | | Updated | Suggests the firmware was modified or the tool’s database recently added this string. |

5. Step-by-Step Fix: From "Unknown Device" to Working Reader

Here is the definitive method to get your Alcor Micro FA00 F/W 3613 device working on Windows 10 and Windows 11.

Part 6: Troubleshooting Updated Errors

Even with the correct tools, you may hit snags. Here is the updated troubleshooting for 2025:

| Error Message | Meaning | Solution | | :--- | :--- | :--- | | "Read Flash ID Fail" | The NAND chip is dead or disconnected. | Physical repair required (reballing). Not DIY. | | "Bad Block over setting" | Too many bad sectors. | In Setup, increase the "Bad Block Limit" to 100. If it still fails, the drive is e-waste. | | "Firmware 3613 not support" | Your AlcorMP version is too old. | Find a package specifically labeled "Updated for AU699X/FA00". | | "Device removed during process" | USB power saving. | Disable "USB Selective Suspend" in Windows Power Options. |