Digi Sm500 Scale User Manual -

Digi SM-500 Precision Balance: The Complete User & Technical Manual

Cleaning Instructions

Operational Report: Digi SM-500 Scale

Subject: User Manual Summary & Operational Guide Model: Digi SM-500 (Label Printing Scale)

Simple Weighing (Manual Price Entry)

Use this method for items that do not have a preset PLU or for one-off sales. digi sm500 scale user manual

  1. Place the item on the scale.
  2. Type the price per kg/lb using the numeric keypad (e.g., 5, 0, 0 for $5.00).
  3. Press the PRICE key (on some models, this step is automatic after entering numbers).
  4. The Total Price will calculate automatically on the screen.
  5. Press the PRINT key to issue a label.

5.3 Changing units

Press UNIT (or MODE) repeatedly to cycle through: Digi SM-500 Precision Balance: The Complete User &

Note: Precision may slightly vary by unit due to rounding. Daily: Wipe the stainless steel platform with a

Section 5: Troubleshooting Common Error Codes

The digi sm500 scale user manual lists several error codes. Here’s what they mean and how to resolve them:

| Error Code | Meaning | Solution | |------------|---------|----------| | EEEEE or O-LD | Overload – weight exceeds capacity | Remove weight immediately. Check load cell for damage. | | Err Z | Zero range error (<-2% or >+2% of capacity) | Remove debris from platform. Press ZERO. Recalibrate if needed. | | Err C | Calibration error | Repeat calibration with correct weight. Ensure no movement. | | Lo Bat | Low battery (if battery option installed) | Replace batteries or connect AC adapter. | | Err 1 | Load cell signal too low | Check load cell cable connection. Load cell may be damaged. | | UnSt | Unstable environment | Stop air flow, use stable table, wait for vibration to cease. |