Epson 1390 Resetter May 2026

The Epson Stylus Photo 1390 resetter (also known as the Adjustment Program) is used to fix the "Service Required" error . This error occurs when the printer's internal waste ink pad counter reaches its limit, causing the ink and paper lights to flash alternately . 🛠️ Step-by-Step Reset Guide

Most free versions of the 1390 resetter are date-locked and require specific system changes to run .

Adjust System Date: Change your computer's date to October 4, 2007 .

Launch Program: Run AdjProg.exe or Adjustment.bat as an Administrator . epson 1390 resetter

Select Printer: Click "Select" and ensure the Model Name is set to "Stylus Photo 1390" . Enter Mode: Click Particular Adjustment Mode .

Locate Counter: Select Waste ink pad counter from the maintenance list and click OK . Check & Initialize:

Check the boxes for "Main pad counter" and "FL Box counter" . The Epson Stylus Photo 1390 resetter (also known

Click Check to see the current status (it should show 100%) . Click Initialization to clear the memory .

Finalize: Turn the printer OFF and then back ON when prompted . ⚠️ Critical Maintenance Warnings How to Reset Epson SP 1390 Printer

Disclaimer: The following guide is for educational and troubleshooting purposes only. Using software resetter tools involves interacting with your printer's firmware. Proceed at your own risk. Additionally, be aware that downloading such tools from the internet can sometimes expose your computer to malware. Always use trusted sources and scan files before opening them. Effectiveness: 10/10

1. Core Function: Counter Reset

Effectiveness: 10/10. If your printer is physically functional (motors working, no hardware damage), the software will instantly clear the error.
Speed: The reset process takes less than 30 seconds once the software is open.

The Problem: Why Do You Need It?

If you are reading this, your printer is likely showing one of these messages:

"A printer error has occurred. See your documentation."
"The printer's ink pads are at the end of their service life. Please contact Epson Support."

When this happens, the printer is essentially "bricked" by software. It will not print, clean, or scan. Epson's official solution is to service the printer, but the cost of service often exceeds the value of the printer. This is where the Resetter comes in.

Pros & Cons

| Pros | Cons | |------|------| | Saves money on service center fees | Does not physically replace ink pads | | Extends printer life significantly | May void warranty (if still under warranty) | | Quick (takes 2 minutes) | Requires basic PC skills | | Works offline | Some versions trigger antivirus false positives |

Key Features

Resets Waste Ink Counter – Clears the internal counter that triggers the “printer parts end of life” error.
No Hardware Modification Needed – Works via USB connection; no need to open the printer.
User-Friendly Interface – Simple, step-by-step operation with clear instructions.
Compatible with Windows (XP to 11) – Runs on most modern Windows systems (may require disabling driver signature enforcement on newer OS).
Free or Low-Cost – Widely available as freeware or for a small fee from third-party utilities.