Skip to main content

How To Install Mtk Driver Mediatek Preloader Usb Vcom [repack] Link

Installing the MediaTek (MTK) VCOM USB Preloader driver is a critical step for using tools like SP Flash Tool to flash firmware onto MediaTek-powered devices . Because these drivers are often unsigned, standard Windows security will block them unless you manually intervene . Phase 1: Disable Driver Signature Enforcement

Windows 10 and 11 require digitally signed drivers by default. You must temporarily disable this to install MTK drivers . How to install Mediatek USB VCOM drivers in Windows

Installing the MediaTek (MTK) Preloader USB VCOM driver is a critical step for anyone looking to flash firmware, unbrick a device, or use tools like the SP Flash Tool. These drivers allow your Windows PC to communicate with your MediaTek-powered smartphone or tablet while it is in "Preloader" mode. how to install mtk driver mediatek preloader usb vcom

Since many of these drivers are not digitally signed, Windows 10 and 11 will often block them by default. This guide covers the essential preparation and step-by-step manual installation. Prerequisite: Disable Driver Signature Enforcement

Before starting, you must temporarily disable a security feature that prevents the installation of unsigned drivers. Driver Easy Download MTK USB Drivers for Windows 11, 10 Installing the MediaTek (MTK) VCOM USB Preloader driver

Here’s a concise, step-by-step guide to install the MediaTek PreLoader USB VCOM driver (required for flashing firmware, using SP Flash Tool, or unbricking MTK devices).

Step 2: Enable Developer Options and USB Debugging on Your Device

  1. Go to Settings > About Phone > Build Number and tap on it 7 times to enable Developer Options.
  2. Go back to Settings > Developer Options and enable USB Debugging.

4. Error Code 10 (This device cannot start).

Solution: This is often a USB 3.0 conflict. Try: Step 2: Enable Developer Options and USB Debugging

  • Use a USB 2.0 port (black plastic inside, not blue).
  • Use a USB 2.0 hub between PC and phone.
  • Update chipset drivers for your motherboard.

Step 1: Disable Driver Signature Enforcement (Windows 10/11)

This is the most critical step. If you skip this, the installation will fail.

  1. Press Windows Key + X and select Settings.
  2. Go to Update & Security > Recovery.
  3. Under "Advanced startup," click Restart now.
  4. Your PC will reboot into a blue menu. Click Troubleshoot.
  5. Click Advanced options.
  6. Click Startup Settings.
  7. Click the Restart button.
  8. After the final reboot, you will see a list of options. Press the number key 7 or F7 on your keyboard to select Disable driver signature enforcement.
  9. Windows will boot up normally. You can now install the drivers.