Jinka Jk 1351 Driver Software May 2026

Jinka JK1351 is a widely used professional vinyl cutting plotter known for its 1350mm (approx. 53-inch) media width. To operate the machine on modern systems like Windows 10 or 11, you typically need two types of software: communication driver (to recognize the USB/Serial connection) and cutting software (to send design data to the blade) 1. Communication Drivers

Most Jinka plotters use a USB-to-Serial bridge chip. If your computer does not recognize the device when plugged in, you likely need to install one of the following: CH340 USB-Serial Driver

: This is the most common driver for Jinka machines. It allows the computer to communicate with the plotter via a virtual COM port. You can download it from WCH Official Site FTDI or PL2303

: Some older or specific regional models may use these alternative chips. Check your Device Manager under "Other Devices" to see if it lists a specific chip name. 2. Supported Cutting Software

The driver only establishes the connection; you still need design and cutting software to manage your projects. Software for JinKa XE-1351 plotter - PlotCalc

Jinka JK-1351 cutting plotter typically requires specific USB drivers and cutting software to communicate with your computer. Drivers allow the operating system to recognize the plotter as a COM port, while software like , or plugins for are used to send designs to the machine Download Options Official Jinka Indonesia Portal Jinka Indonesia Download Page

provides direct Google Drive links for various models, including the JK and XL series. PlotCalc (CorelDRAW Plugin) : If you use CorelDRAW, the PlotCalc Software

page offers specific drivers and plugins for the JK-1351PE model.

: Some retailers bundle the machine with "Jinka Cut" software, which includes a contour trimming wizard for beginners. Installation & Configuration Driver Setup : After installation, the device should appear in Device Manager Ports (COM & LPT) as "USB-Serial CH340" or similar. Connection

: Ensure the plotter is connected via USB and powered on before opening your software. Software Settings

: Select "JINKA 1351" or "Generic HPGL" if the specific model isn't listed.

: Match the COM port number found in Device Manager (e.g., COM3). Command Language : The JK-1351 typically uses Compatibility Notes Legacy Systems

: Older versions of the JK-1351 may struggle with Windows 10 or 11, as some original drivers were designed for Windows XP or Windows 7. If the standard driver fails, try running the installer in Compatibility Mode or using a CH340 serial-to-USB driver. Microsoft Learn Are you having trouble with the computer recognizing the plotter , or are you looking for design software recommendations to use with it? Software for JinKa JK-1351PE plotter - PlotCalc

Jinka JK-1351 is a popular wide-format cutting plotter known for its high precision and speed. To get the most out of this machine, you need the correct driver software to establish a stable connection between your computer and the hardware. Essential Driver Downloads

Depending on your specific model variant and operating system, you can download the drivers from the following official and verified sources:

JINKA Indonesia (Official Repository): Offers a comprehensive list of driver links hosted on Google Drive for various models. Tipe JK/XL (Only Cut) Driver Tipe XL PRO 721 / 1351 (Only Cut) Driver USB Communication Driver: Most Jinka machines require the FTDI USB-to-Serial driver jinka jk 1351 driver software

to communicate via a virtual COM port. If your PC doesn't recognize the plotter, this is often the missing component. Compatible Cutting Software & Plugins

Drivers only provide the "handshake"; you still need software to send your designs to the plotter. Software for JinKa JK-1351PE plotter - PlotCalc

Jinka JK-1351 is a large-format cutting plotter known for its precision in vinyl cutting. To bring it to life, you need the right driver—typically a USB or serial communication bridge—and compatible software like Artcut or PlotCalc.

Here is a short story about the "magic" that happens when the driver finally clicks into place. The Ghost in the Machine

sat in the corner of Leo’s studio like a silent, industrial beast. It was massive, capable of handling vinyl rolls nearly four feet wide, yet for the last three hours, it had been nothing more than an expensive paperweight.

Leo stared at his monitor. He had the designs—a intricate set of "Print & Cut" stickers for a local cafe—but every time he hit 'Send,' his computer acted like the plotter didn't exist.

"Come on," he muttered, scrolling through a forum for Jinka Indonesia. He needed the bridge. The driver was the translator, the only thing that could turn his digital vectors into the physical force of a Roland-compatible blade.

He found it: a small, unassuming .zip file. He downloaded it, ran the installer, and held his breath. He navigated to his Device Manager, looking for the magic words: USB-Serial CH340 under Ports (COM & LPT). There it was. He opened Artcut, set the output device to Jinka JK-1351 , and clicked the 'Cut' icon.

A sudden, sharp chirp erupted from the plotter. The LCD screen flickered to life, displaying the cutting force and speed. With a rhythmic, mechanical hum, the pinch rollers gripped the vinyl, and the carriage began its dance. The blade moved with terrifying speed—up to 800mm/s—tracing the curves of the cafe's logo with a precision his old analog machines could never touch.

The driver wasn't just software. It was the handshake that finally allowed his creativity to meet the steel. Quick Reference for Your JK-1351

If you are currently setting up your machine, ensure you have these components ready: Essential Driver: You likely need the CH340 USB-to-Serial driver Go to product viewer dialog for this item. to allow your PC to recognize the plotter's USB port.

Compatible Software: Common choices include Artcut, PlotCalc (CorelDRAW Plugin), or Anycut.

Connection Check: After installation, verify the device appears under Ports (COM & LPT) in your Windows Device Manager.

Are you having trouble connecting the plotter to a specific design program like CorelDraw or Illustrator? Software for JinKa JK-1351PE plotter - PlotCalc

To set up your Jinka JK-1351 cutting plotter, you need both a USB driver (to allow your computer to recognize the machine) and cutting software (to send designs to it). 1. Download Driver Software Jinka JK1351 is a widely used professional vinyl

Jinka machines typically use USB-to-Serial drivers to communicate with Windows.

USB Drivers: You can often find official USB drivers through vendors like Jinka Indonesia or SignCut.

Alternative: If Windows does not automatically detect the plotter, look for the CH340 or FTDI driver, as many Chinese plotters use these chips for USB connectivity. 2. Compatible Cutting Software

Once the driver is installed, you need software to manage the cutting process. The is compatible with several industry-standard programs:

SignMaster: Often bundled with Jinka machines; it handles both design and cutting.

Artcut: A classic, budget-friendly option for simple vinyl cutting.

CorelDRAW / Adobe Illustrator Plugins: Use plugins like PlotCalc or XFCut to cut directly from your design software.

FlexiStarter / FlexiSign: A professional-grade option for advanced contour cutting. 3. Installation Steps Software for JinKa XE-1351 plotter - PlotCalc

Jinka JK 1351 driver and software are essential for connecting your computer to the cutting plotter. Most users require both a hardware driver (to recognize the USB/Serial connection) and specialized cutting software (to send designs to the machine). 📥 Driver Downloads

Official drivers are often model-specific and depend on whether your machine is "Cut Only" or supports "Contour Cutting." Official support from Jinka Indonesia

: Provides a central repository for various JK series models. JK / XL (Only Cut) Direct Download Link JK XE Series (USB Driver CH341SER) : Available on for newer builds. Generic USB Drivers : Many Jinka plotters use the

chipset. If the standard driver fails, these common USB-to-serial drivers often work. 🖥️ Cutting Software Options

While drivers handle the connection, you need one of the following programs to manage your cutting projects:

: This is the native, entry-level software typically bundled with the

. It is designed for beginners and allows importing JPG images for simple contour cutting Anycut / Flexi The model number is incorrect or incomplete

: Often used for more advanced features like semi-auto contour cutting. CorelDRAW Plugins : Tools like

act as plugins for CorelDRAW (X7 to 2024 versions), allowing you to cut directly from your design software. SignCut Pro 2

: A popular professional alternative that offers specific driver compatibility for Jinka models. 🛠️ Installation Steps Software for JinKa XE-1351 plotter - PlotCalc 22 May 2025 —

I couldn’t find any official or widely recognized “Jinka JK 1351” driver software in standard hardware or peripheral databases. It’s possible that:

• The model number is incorrect or incomplete.
• It’s a very niche or region-specific device (e.g., a barcode scanner, printer, label maker, or industrial component).
• The name “Jinka” may be a misspelling or a rebranded product.

To help you better, please check:

1. The device’s label for a full model number and manufacturer name.
2. What type of device it is (e.g., webcam, scanner, receipt printer).
3. If possible, the USB VID/PID (on Windows: Device Manager → Properties → Details → Hardware IDs).

General suggestions:

• Try searching on DriverGuide or DriverIdentifier.
• Look for a CD that came with the device.
• Contact the seller or manufacturer directly if known.

If you can provide more details (device type, any other numbers, or a photo of the label), I’ll be glad to search more precisely for you.

2. Key Features of the JK-1351 Driver

• Operating System Compatibility – Supports Windows 7/8/10/11 (32/64-bit), with limited legacy support for Windows XP and Linux distributions via CUPS (Common UNIX Printing System).
• Interface Support – Handles USB (virtual COM port), Ethernet (TCP/IP), and legacy parallel (LPT) connections.
• Command Set – Emulates standard ESC/POS (Epson Standard Code for Point of Service) commands, enabling easy integration with POS software.
• Bidirectional Communication – Allows status retrieval (paper out, cover open, error states) from the printer to the application.

Problem 2: Printer Prints Blank Labels or Partial Text

• Cause: Incorrect label size in software settings or low print darkness.
• Fix: In your labeling software (e.g., BarTender, Seagull, Notepad), change page size to exactly match your paper. Increase darkness in Printing Preferences.

4) Download and installation steps (Windows)

1. Download the driver package for your Windows version (Win7/8/10/11, 32/64-bit).
2. Unzip the archive to a folder.
3. Run any included installer (setup.exe) as Administrator. If none:
   • Open Device Manager, find the device (may appear under “Other devices”).
   • Right-click → Update driver → Browse my computer → Choose the extracted folder → Next.
4. If Windows blocks unsigned drivers: allow installation in Settings → Update & Security → Recovery → Restart → Troubleshoot → Advanced Options → Startup Settings → Disable driver signature enforcement (temporary).
5. Reboot after installation.

Quick guide — Jinka JK-1351 driver software

Can I use Zebra or TSC drivers for the Jinka JK 1351?

Partially. The JK 1351 emulates Zebra’s ZPL (Zebra Programming Language) at a basic level. For simple text labels, a Zebra driver might work, but barcodes or graphics may fail. Always prefer the native Jinka driver.

Step-by-Step Installation Guide

Once you have the driver file (usually a .zip or .exe file), follow these steps:

Step 1: Unzip the Files If the driver is in a compressed folder, right-click and extract it to a location you can easily find, like your Desktop.

Step 2: Run the Installer Locate the Setup.exe or Install.exe file inside the folder. Right-click and select "Run as Administrator" to ensure it has permission to modify system files.

Step 3: Connect the Hardware

• Do not plug the cutter in yet if the instructions tell you to wait.
• Follow the on-screen prompts. When the installer asks you to connect the device, power on your JK 1351 and plug the USB cable into your PC.
• Windows will attempt to automatically install the driver. If it fails, you may need to point the Device Manager to the folder where you extracted the driver files.

Step 4: Configure the Port After installation, go to your Device Manager (Right-click Start Button > Device Manager). Look under "Ports (COM & LPT)." You should see "USB Serial Port" or "Jinka JK 1351." Note the COM number (e.g., COM3 or COM4), as you will need to select this exact number inside your cutting software.

Verdict: 3.5/5 Stars

The Jinka JK 1351 is a capable machine held back by software that feels stuck in time.

• Pros: Reliable data transmission, precise control over cutting parameters, compatible with popular third-party software.
• Cons: Frustrating installation on modern operating systems, reliance on a physical USB dongle, outdated user interface.

Recommendation: If you buy this cutter, do not rely solely on the included CD. Immediately check for Windows 10/11 compatible drivers online, or budget for third-party software like Sure Cuts A Lot to ensure a smoother, modern workflow. Once you solve the software puzzle, the JK 1351 proves to be a workhorse that punches above its weight class.