Common Use: Water treatment, specifically for solids/liquid separation and clarification.
Chemical Family: Anionic polymer or organic coagulant (specific formulations vary by region). Hazard Identification
GHS Classification: Generally classified as non-hazardous under standard conditions, but can cause mild irritation.
Physical Hazards: Spills are extremely slippery. This is the primary physical hazard associated with polymer-based water treatments. Eye Contact: May cause slight redness or watering.
Skin Contact: May cause mild irritation with prolonged exposure.
Inhalation: Not expected to be a route of exposure unless misted; mists may irritate the respiratory tract. First Aid Measures
Eyes: Flush immediately with plenty of water for at least 15 minutes. Seek medical attention if irritation persists.
Skin: Wash with soap and water. Remove contaminated clothing and wash before reuse.
Ingestion: Do not induce vomiting. Give small sips of water and seek medical advice. Inhalation: Move to fresh air. Handling and Storage
Safe Handling: Wear appropriate personal protective equipment (PPE), including safety glasses and gloves. Avoid creating mists.
Storage: Store in a cool, dry, well-ventilated area. Keep containers closed when not in use.
Spill Cleanup: Do not use water initially, as it will make the surface dangerously slippery. Use an absorbent material (sand, sawdust, or commercial absorbent) to soak up the liquid. Environmental & Disposal
Environmental Impact: Large spills should be prevented from entering waterways.
Disposal: Dispose of in accordance with local, state, and federal regulations. It is generally not considered a RCRA hazardous waste unless contaminated by other materials.
Note: This report is for informational purposes. You should always consult the official manufacturer-issued SDS provided by Ecolab/Nalco Water for the most current regulatory compliance and safety data specific to your region.
You're looking for information on Nalco 8514 Plus, a product from Ecolab. I've created a helpful content piece related to its Material Safety Data Sheet (MSDS), which is now referred to as a Safety Data Sheet (SDS) due to the Globally Harmonized System of Classification and Labeling of Chemicals (GHS).
Nalco 8514 Plus Safety Data Sheet (SDS)
The Nalco 8514 Plus SDS provides critical information on the safe handling, use, storage, and disposal of this product. Here's a summary of the key points:
Product Identification:
Hazards Identification:
Composition/Information on Ingredients:
First Aid Measures:
Fire-Fighting Measures:
Accidental Release Measures:
Handling and Storage:
Exposure Controls/Personal Protection:
Physical and Chemical Properties:
Stability and Reactivity:
Toxicological Information:
Ecological Information:
Disposal Considerations:
Transport Information:
Regulatory Information:
Other Information:
To verify the information and obtain the most up-to-date SDS, I recommend:
: It is NSF-certified for treating boilers, steam lines, and cooling systems (Category Code G7). Food Processing Safety
: While acceptable in food processing areas, neither the treated water nor produced steam should directly contact edible products. Regulatory Compliance
: Facilities must ensure its use does not result in the adulteration of food, often managed through a HACCP plan Hazard Profile & Handling Health Hazards
: The product is generally non-flammable and non-combustible. However, direct contact with eyes, skin, or clothing should be avoided as it can cause irritation. Protective Gear (PPE)
: Standard industrial safety practices are required, including chemical splash goggles , protective gloves, and ensuring adequate ventilation. Inhalation : Move the person to fresh air.
: Rinse thoroughly with water; wash hands immediately after handling.
: Do not induce vomiting; seek medical attention if symptoms occur. Autobrillante Storage & Disposal
: Stable under normal conditions, but should be kept away from incompatible materials and extreme temperatures. nalco 8514 plus msds verified
: Contaminated water and residue should be disposed of according to local environmental regulations. Autobrillante
For full safety verification, you can search for the specific SDS by its product ID on the Ecolab SDS portal chemical compatibility with specific industrial metals or equipment? nalco® 8514 plus - NSF
Here’s a professional, positive review for Nalco 8514 Plus with verified MSDS documentation:
Title: Reliable Performance & Safety Confidence – Nalco 8514 Plus
Review:
We’ve been using Nalco 8514 Plus in our cooling water system, and it consistently delivers excellent corrosion and scale inhibition. What really sets it apart for our team is the verified MSDS – having clear, accessible, and up-to-date safety data sheets gives our operators and EHS staff full confidence in handling, storage, and emergency response. The product itself performs as promised: stable pH control, reduced fouling, and lower overall chemical consumption. When you combine effective water treatment chemistry with transparent safety documentation, it’s a win-win. Highly recommended for any industrial facility that prioritizes both performance and compliance.
This guide outlines the critical safety and regulatory information for Nalco 8514 Plus , a specialized biocide used in industrial water treatment. Product Overview Nalco 8514 Plus
is a high-performance, non-oxidizing biocide primarily utilized for the treatment of industrial cooling water systems. It is designed to control biological growth, such as bacteria and algae, which can lead to corrosion and reduced efficiency in cooling towers and closed-loop systems. Regulatory & NSF Verification
Nalco 8514 Plus holds specific registrations for use in food-related environments, provided certain conditions are met: NSF Registration No. Category G5:
Acceptable for the treatment of cooling and retort water in and around food processing areas. Category G7:
Acceptable for treating boilers, steam lines, and cooling systems where neither the treated water nor the produced steam contacts edible products. Usage Restriction:
It is reserved for industrial and professional use only and is often marketed for distribution outside the United States. Verified Safety Data (MSDS/SDS Summary)
Based on verified safety documentation, users should adhere to the following safety protocols: Data / Specification Physical State Colorless liquid Approximately 7.2 (at 20°C) Specific Gravity Primary Hazards
Can cause moderate skin and eye irritation; prolonged inhalation of vapors may be harmful PPE Requirements
Wear chemical goggles, face shield, and impervious gloves/footwear
Protect from freezing; store in tightly closed, labeled containers separate from acids First Aid Measures Eye Contact:
Immediately flush with water for at least 15 minutes while holding eyelids open; seek medical attention. Skin Contact:
Flush with water for at least 15 minutes. For large exposures, use a safety shower. Ingestion:
induce vomiting. Give water and call a physician immediately. Inhalation: Move to fresh air and treat symptoms. Disposal and Environmental Safety
Nalco 8514 Plus should not be disposed of with household garbage or allowed to reach sewage systems without treatment. Disposal must comply with local, state, and federal regulations regarding pesticide and chemical waste. nalco® 8514 plus - NSF
Page 1. RE: NALCO® 8514 PLUS. Category Code: G5, G7. NSF Registration No. 145534. Dear Ms. Jean Mayszak: NALCO MATERIAL SAFETY DATA SHEET
A standout feature of NALCO® 8514 PLUS is its specialized bio-fouling control for industrial water systems. Product Name: Nalco 8514 Plus Product Number: Not
According to its product profile and safety data sheets, its key strengths include:
Versatile Biocidal Action: It is designed to remove biological and organic deposits from pipelines and equipment, effectively suppressing the growth of bacteria, fungi, yeast, and algae.
Broad System Compatibility: It is formulated for use in cooling systems, boilers, and steam lines.
NSF G7 Registration: It is recognized as acceptable for treating systems in and around food processing areas, provided that neither the treated water nor the produced steam comes into contact with edible products.
Membrane Protection: It is specifically noted for its ability to clear deposits from reverse osmosis (RO) membranes, helping to maintain system efficiency.
Quick Safety Note: As a biocidal mixture, it can cause moderate eye and skin irritation. Always ensure proper ventilation and use appropriate PPE during handling, as outlined in the Nalco Safety Data Sheet. nalco® 8514 plus - NSF
Nalco 8514 Plus is a specialized chemical formulation used primarily as a scale and corrosion inhibitor in industrial water systems. Understanding its Material Safety Data Sheet (MSDS)—now more commonly referred to as a Safety Data Sheet (SDS) under the Globally Harmonized System (GHS)—is critical for ensuring workplace safety, regulatory compliance, and environmental protection. A verified SDS provides standardized, accurate information regarding the chemical's hazards, handling procedures, and emergency response protocols. Chemical Composition and Identification
Nalco 8514 Plus is engineered by Ecolab's Nalco Water division. While specific proprietary blends are often protected as trade secrets, a verified SDS outlines the hazardous components that dictate its handling. It typically contains active ingredients designed to sequester hardness ions and prevent the deposition of mineral scales (such as calcium carbonate) on heat transfer surfaces, alongside specific inhibitors that protect metallurgy from corrosive attacks. Hazard Identification and Health Effects
The primary utility of a verified SDS is to communicate the potential risks associated with the product. Nalco 8514 Plus is generally classified as a hazardous chemical, and its SDS will feature specific GHS pictograms, signal words, and hazard statements.
Eye and Skin Contact: The product can cause moderate to severe irritation. Direct contact with the concentrated liquid may lead to redness, pain, and potential chemical burns depending on the exposure duration.
Inhalation: Inhalation of mists or vapors can irritate the respiratory tract, causing coughing or shortness of breath.
Ingestion: Swallowing the chemical can cause gastrointestinal tract irritation, nausea, vomiting, and burns to the mouth and throat. First-Aid and Emergency Measures
A verified SDS provides immediate, step-by-step instructions for untrained responders to administer first aid.
Eyes: Immediately flush with large amounts of lukewarm water for at least 15 minutes, holding the eyelids open. Seek medical attention.
Skin: Remove contaminated clothing and immediately wash the affected area with soap and water.
Inhalation: Move the exposed person to fresh air. If breathing is difficult, trained personnel should administer oxygen.
Ingestion: Do not induce vomiting unless directed by medical personnel. Rinse the mouth thoroughly with water and seek immediate medical attention. Safe Handling, Storage, and PPE
To mitigate the risks outlined in the hazard identification section, the SDS specifies engineering controls and Personal Protective Equipment (PPE).
Personal Protective Equipment: Workers handling Nalco 8514 Plus should wear chemical-resistant gloves (such as neoprene or nitrile), safety goggles or a full-face shield, and protective clothing to prevent skin contact. If local exhaust ventilation is inadequate to keep airborne concentrations low, appropriate respiratory protection is required.
Storage: The product should be stored in a cool, dry, well-ventilated area away from incompatible materials, such as strong acids or oxidizers. Containers must be kept tightly closed when not in use and clearly labeled to reflect the contents and hazards. Environmental Impact and Disposal
Industrial chemicals pose a significant risk to aquatic life and ecosystems if mishandled. A verified SDS for Nalco 8514 Plus contains ecotoxicity data and spill cleanup procedures. In the event of a leak or spill, the area should be isolated, and the liquid should be absorbed with inert materials (like sand or earth) and placed in chemical waste containers. It is strictly prohibited to allow the concentrated product to enter drains, surface water, or ground water systems. Disposal must always be conducted in accordance with local, regional, and national environmental regulations. Hazards Identification:
A verified SDS for Nalco 8514 Plus is an indispensable tool for industrial safety. It bridges the gap between complex chemical engineering and practical, on-the-ground safety management. By strictly adhering to the guidelines set forth in the verified data sheet, industrial facilities can harness the efficiency-boosting power of Nalco 8514 Plus while successfully safeguarding their workforce and the surrounding environment.