Onkyo Rc-799m Remote Manual

The Onkyo RC-799M Go to product viewer dialog for this item.

is a dedicated infrared remote control typically used with Onkyo AV receivers like the HT-R391, HT-RC330, and TX-SR313 . Key Usage Instructions

Plug-and-Play: For most compatible Onkyo receivers, this remote requires no programming . Once you insert two AA alkaline batteries, it should operate the receiver immediately .

Operating Range: Ensure you are within roughly 10 meters (33 feet) of the receiver and pointing the remote directly at the receiver's IR sensor Device Limitations: Standard versions of the

and most third-party replacements cannot be programmed to control other devices like your TV, DVD player, or cable box . Programming (If Supported)

While many versions are non-programmable, some users have reported success with the following standard Onkyo programming sequence to control basic TV functions :

Locate the 5-digit code for your TV brand (e.g., 10818 for Sharp).

Press and hold the [REMOTE MODE] button (like TV) and [DISPLAY] simultaneously for about 3 seconds until the button stays lit.

Enter the 5-digit code using the number keys within 30 seconds. If the code is accepted, the button will flash twice.

Onkyo RC-799M is a dedicated infrared (IR) remote control designed specifically for Integra A/V receivers

. It is widely used as a replacement for original models like the RC-707M, RC-738M, and RC-765M. Core Operation Guide For basic use with a compatible Onkyo receiver, no programming is required

; it works immediately upon inserting two AA or AAA batteries (depending on the specific version). Amazon.com Activating Control : To operate your receiver, you must first press the button on the remote. Powering On/Off ON/STANDBY button after selecting the receiver mode. Input Switching Input Selector

buttons (e.g., BD/DVD, CBL/SAT, GAME) to switch the receiver to a specific source. Zone 2 Control : Press the button followed by ON/STANDBY to power your multi-zone system. Programming for External Devices

controls Onkyo receivers out of the box, you can program it to operate other devices like TVs or cable boxes using the following steps: How to Configure Onkyo Settings Review

The Onkyo RC-799M is a dedicated remote controller designed for specific Onkyo AV receivers, such as the HT-R391, TX-SR309, and HT-RC330. Most versions of this remote work "out of the box" for these receivers and do not require complex programming unless you are attempting to control external components like a TV or DVD player. Quick Setup & Programming

Initial Setup: Insert two 1.5V AA alkaline batteries. Point the remote directly at the receiver's sensor within a range of about 16 feet (5 meters). Programming for External Components:

Hold down the REMOTE MODE button (e.g., TV, DVD) you wish to program while simultaneously holding the DISPLAY button for about 3 seconds. Wait for the REMOTE MODE button to light up.

Enter the 5-digit code for your device using the number keypad within 30 seconds.

If the code is accepted, the REMOTE MODE button will flash twice.

Resetting the Remote: To clear custom codes and return to factory settings, hold down the specific REMOTE MODE button and the L NIGHT button simultaneously for 3 seconds until the mode button flashes twice. Core Button Functions Remote Control Codes - Onkyo - YUMPU

The Onkyo RC-799M is a dedicated audio-video receiver remote primarily used for controlling Onkyo and Integra receivers like the TX-SR309 or HT-R391. It typically requires no programming to work with its original receiver right out of the box. Quick Setup & Programming onkyo rc-799m remote manual

If you need to program the remote to control external devices (like a TV or DVD player), use the following steps: Assigning Device Codes:

Simultaneously press and hold the REMOTE MODE button (e.g., BD/DVD, CBL/SAT) and the DISPLAY button for about 3 seconds until the button stays lit.

Within 30 seconds, enter the 5-digit remote control code for your device using the number pad. If successful, the REMOTE MODE button will flash twice.

TV Programming: To specifically link your TV's power, hold the TV and DISPLAY buttons until the red light illuminates, then enter your TV's brand code. Direct Code Examples:

Common codes for Onkyo receivers include 30135, 30380, 30842, and 31298. Key Button Functions

Receiver/Main Power: Turns the main receiver unit on or into standby.

Input Selectors: Buttons below the power key (DVD, VCR, CBL) change the audio/video source.

Listening Modes: Press Movie/TV, Music, or Game repeatedly to cycle through sound profiles.

Navigation: Use the Cursor (Arrows) and ENTER buttons to navigate on-screen setup menus.

Audio Levels: Press the Right Arrow during playback for quick access to Bass, Treble, and Subwoofer levels. Maintenance & Troubleshooting

Final Verdict: Should you replace it?

If your RC-799M is physically broken (dropped, cracked board), do not pay $80 for a used one on eBay. Instead, buy a universal remote like the Logitech Harmony 665 (discontinued but available used) or a SofaBaton U2.

However, if your RC-799M just needs a cleaning, it remains one of the most comfortable, well-laid-out remotes Onkyo ever made. It has dedicated buttons for everything—no digging through touch-screen menus.

Need the official PDF? Visit Onkyo’s support site and search for "TX-NR807 manual." The remote section is identical.

Have a trick for the RC-799M that we missed? Leave a comment below. Did the cleaning trick fix your sticky volume button? Let us know!

To program your Onkyo RC-799M Go to product viewer dialog for this item.

remote or troubleshoot issues, follow the steps below derived from official function guides and setup manuals. Programming Instructions You can program the Go to product viewer dialog for this item. to control external devices like TVs or DVD players.

Enter Program Mode: Press and hold the REMOTE MODE button you want to program (e.g., TV, BD/DVD) and the DISPLAY button simultaneously for about 3 seconds until the indicator light stays on .

Enter Code: Within 30 seconds, use the number buttons to enter the 5-digit remote control code for your device's brand .

Confirm Success: If the code is accepted, the REMOTE MODE button will flash twice . If it flashes once slowly, the code was not successful, and you should try again or use a different code .

Note: The RECEIVER and ZONE 2 buttons cannot be programmed with external device codes . Common Remote Codes Sharp TV: 10818 The Onkyo RC-799M Go to product viewer dialog

MHL-enabled devices: 33101 (North America) or 32910 (Europe/Asia) Troubleshooting & Resets If your remote is unresponsive, try these steps:

Remote Reset: Press and hold the RECEIVER and HOME buttons until the indicator light comes on to reset the remote's internal settings .

Power Discharge: Remove the batteries and hold the Power button for 20 seconds to clear residual power before reinserting fresh AAA batteries .

Remote ID Check: If the remote still won't control the receiver, ensure the Remote ID on your receiver (found in Setup > Hardware) matches the remote's ID (typically set to ID 1) . Key Button Functions Q/Setup: Accesses advanced settings menus on your TV .

Home/Audio: Switches to the home menu or media playback controls .

Dimmer: Adjusts the brightness of the receiver's front display .

For a full list of brand-specific codes or to download the complete PDF, refer to the Onkyo RC-799M Function Guide or the Onkyo Remote Code Instruction manual.

Onkyo RC-799M is an infrared remote control specifically designed for Onkyo and Integra audio-video receivers. For most compatible receivers, it requires no initial programming and works "out of the box" after inserting two AA alkaline batteries. Amazon.com.au Programming Instructions

To program the remote to control other components (like a TV), use the following steps: Enter Programming Mode : Simultaneously press and hold the desired REMOTE MODE button and the

button for approximately 3 seconds until the light illuminates. Input Device Code

: Within 30 seconds, enter the 5-digit remote control code for your device using the number buttons.

: If the code is accepted, the REMOTE MODE button will flash twice. : Press the button to see if the external device responds. Compatible Models

The RC-799M is officially compatible with the following Onkyo AV Receiver models: Amazon.com.au HT-R Series : HT-R391, HT-R548, HT-R558, HT-R590, HT-R591 HT-RC Series : HT-RC330, HT-RC430 HT-S Series : HT-S3500, HT-S5400, HT-S5500 TX-SR Series : TX-SR309, TX-SR313 Key Resources Full Guide : A detailed Button Mapping and Functionality Guide for various modes (Receiver, TV, DVD, etc.). Official Downloads

: You can search for specific receiver manuals containing remote instructions on the Onkyo Downloads Page by entering your receiver's model number. Troubleshooting

: If the remote fails, test its signal by pointing it at a smartphone camera lens; you should see the infrared light flash on the screen when buttons are pressed. JustAnswer Do you need the 5-digit codes

for a specific brand of TV or DVD player to finish your setup?

Onkyo RC-799M Remote Manual Report

Introduction

The Onkyo RC-799M is a remote control designed to work with various Onkyo home theater systems and audio components. This report aims to provide a comprehensive overview of the remote's features, functions, and operations.

Remote Control Layout

The Onkyo RC-799M remote control has a standard layout with a sleek and ergonomic design. The remote has a total of 55 buttons, which are divided into several sections:

Top Section: Power button, Input selector buttons (e.g., BD, DVD, GAME, etc.)
Navigation Section: Arrow buttons (up, down, left, right), OK button, and Menu button
Playback Section: Play, Pause, Stop, Fast Forward, and Fast Reverse buttons
Audio Control Section: Volume up and down buttons, Mute button, and Audio button
Function Section: Button for accessing the receiver's setup menu, sleep button, and others

Key Features and Functions

Some notable features and functions of the Onkyo RC-799M remote control include:

Input Source Selection: The remote allows users to select from various input sources, such as BD, DVD, GAME, TV, and more.
Playback Control: Users can control playback of media using the play, pause, stop, fast forward, and fast reverse buttons.
Volume Control: The remote provides volume up and down buttons, as well as a mute button to quickly silence the audio.
On-Screen Menu Access: The remote has a menu button that allows users to access the on-screen menu of their Onkyo device.
Sleep Function: The remote has a sleep button that allows users to set a timer to turn off the device after a specified period.

Setup and Configuration

To use the Onkyo RC-799M remote control, users need to configure it to work with their Onkyo device. This typically involves:

Battery Installation: Installing batteries into the remote control.
Device Code Selection: Selecting the correct device code for the Onkyo device being controlled.
IR Code Learning: Some Onkyo devices may require learning IR codes from the device itself.

Troubleshooting

If the remote control is not functioning properly, users can try:

Battery Replacement: Replacing the batteries with fresh ones.
Device Code Verification: Verifying that the correct device code is being used.
IR Code Re-Learning: Re-learning the IR codes from the device.

Conclusion

The Onkyo RC-799M remote control is designed to provide users with a convenient and intuitive way to control their Onkyo home theater systems and audio components. With its standard layout and range of features, the remote control offers a comprehensive control solution for Onkyo device owners.

Recommendations

For optimal performance, ensure that the remote control is used within range of the Onkyo device.
Regularly replace batteries to prevent weak signal transmission.
Consult the user manual or Onkyo's support resources if issues arise with remote control functionality.

Limitations and Future Improvements

Some users may find the remote control's layout and button placement not ergonomic or user-friendly.
Future improvements could include the addition of backlighting to the remote control for easier use in low-light environments.

References

Onkyo RC-799M Remote Control User Manual
Onkyo Support Website

This report provides a comprehensive overview of the Onkyo RC-799M remote control, covering its features, functions, setup, and troubleshooting.

Programming & Pairing

If your RC-799M is a learning or system remote that requires pairing:

Power on the Onkyo receiver.
If a dedicated pairing sequence exists, press and hold SETUP until the indicator LED blinks.
Use the remote’s on‑screen or printed code list to enter the code for your specific Onkyo model (if required).
Test POWER and VOLUME. If successful, press ENTER or SETUP to store.

If the remote supports discrete codes or device mode switching, try the following:

Press the device mode key (e.g., AMP, TUNER, TV), then press and hold POWER until the device responds.
If the device responds, press ENTER to lock the code.

If the remote is a learning remote:

Place the original device remote and RC-799M head‑to‑head.
Enter learning mode (press SETUP, then the learning command).
Press the source button on the RC-799M, then the corresponding button on the original remote to copy the IR signal.
Repeat for each button to be learned, then exit learning mode.

3. Dual-Device Control: The "Macro" Feature

One hidden gem in the RC-799M manual is the Macro function. A macro allows one button press to trigger a sequence of commands—for example, turning on your TV, then your receiver, then your cable box.

7. Finding the Official PDF Manual Online

While this guide covers 90% of the RC-799M’s features, nothing replaces the official Onkyo RC-799M remote manual for complete code lists and advanced functions (like "Punch-Through" programming). Here is how to obtain it:

Onkyo Support Website: Go to www.onkyo.com/support and search "RC-799M." Note that Onkyo has merged with other brands; use the archived support section.
Manual Sites: Reputable sites like ManualsLib, ManualsOnline, or Archive.org host scanned copies. Search for "Onkyo RC-799M instruction manual PDF."
Ebay / Forums: Some sellers include a CD-ROM or printed copy. Alternatively, AVS Forum and Reddit’s r/hometheater have user-uploaded PDFs.

Important Safety Caution from the original manual: Do not expose the remote to direct sunlight, moisture, or extreme temperatures. Clean only with a soft, dry cloth. Do not use rechargeable Ni-MH batteries, as the lower voltage can cause erratic behavior.

Part 3: Understanding Key RC-799M Functions

If you only use the volume and input buttons, you’re missing 80% of this remote’s power. Here is a glossary straight from the original Onkyo RC-799M remote manual. Final Verdict: Should you replace it