Phison Mpall V5.13.0c ((full)) -

Phison MPALL v5.13.0C is a specialized Mass Production (MP) tool designed for low-level formatting, firmware updates, and repair of USB flash drives utilizing Phison controllers. It is widely used in the technician community to restore "dead" or write-protected drives and to create custom partitions, such as USB-CDROM emulations. Key Technical Details

Controller Support: Optimized for modern Phison controllers, specifically those in the PS2251 (PS23xx) series, including popular chips like the PS2251-07 (PS2307) and PS2251-03.

Firmware Requirements: To function correctly, the tool often requires specific binary files (Burner and Firmware) tailored to the drive's controller and Flash ID, such as BN03V114M.BIN for certain PS2251-03 chips. Primary Functions:

Repair: Fixing drives marked as "Write Protected" or those showing zero capacity.

Customization: Partitioning drives into multiple LUNs (Logical Unit Numbers) to host a bootable ISO as a CD-ROM partition alongside standard storage. Phison Mpall V5.13.0c

Parameter Editing: Adjusting the VID (Vendor ID), PID (Product ID), and serial numbers. General Restoration Process

Technicians typically follow these steps when using MPALL v5.13.0C, as outlined on community hubs like USBDev.ru:

Identification: Use a utility like ChipGenius or Phison's GetInfo to find the exact Controller and Flash ID.

Configuration: Run MPParamEdit_F1.exe to create a .ini configuration file. This includes selecting the "New Configuration" and "Basic Adjustment" modes to map the firmware binaries. Phison MPALL v5

Flashing: Execute MPALL_F1_7F00_DL07_v513_0C.exe, load the configuration, and press "Start." If the drive is not detected, it may need to be put into Test Mode (physically shorting pins on the controller). Troubleshooting & Limitations

Red Box Errors: In MPALL, a "Red" status box usually indicates a mismatch between the firmware version and the controller, or an incorrect Flash ID setting.

Write Protection: Some modern retail drives (e.g., Windows recovery sticks) may have hardware-level write protection that remains difficult to bypass even with MPALL v5.13.0C.

Stability: Users have reported occasional crashes when using older binary files with newer versions of the MPALL software. USBDev

For the most accurate files and configuration guides, the Phison MPALL section on USBDev.ru remains the primary repository for this software. To provide a more specific guide, could you let me know:

What is the Controller model (e.g., PS2251-07) of your drive? What is the Flash ID?

Are you trying to repair a broken drive or create a CD-ROM partition? Phison MPALL v5.13.0C - USBDev.ru

Safe Download Sources:

USBDev.ru – A trusted repository for flash drive tools.
FlashBoot.ru – Offers verified MP tool archives.
Phison’s official site (requires partner login – not public).

Error 3: "Format failed at 99%"

Cause: Bad blocks that cannot be remapped.
Fix: Reduce the capacity in MPParamEdit (e.g., set 32GB drive to 29GB) to exclude the bad area. Re-run the tool.

5. Step 2 – Create a Configuration (.ini) File

Close main tool, use MPParamEdit_F1.exe:

Phison MPall v5.13.0c vs. Other MP Tool Versions

Verdict: v5.13.0c is the most reliable for everyday repair scenarios. Use newer versions only if your drive was manufactured after 2020.