Skip to main content

Rk Android Tool V135 Free

Rockchip Android Tool v1.35 is a legacy Windows utility used for flashing stock firmware, kernels, and system images onto devices powered by Rockchip (RK)

processors, such as Android tablets, TV boxes, and e-books. It supports a wide range of older chipsets including RK2818, RK2918, RK3066, and RK3188. Key Features and Capabilities Firmware Flashing : Allows users to install complete

firmware files or flash individual partitions like the kernel, boot, or recovery. Partition Management

: Features a "Download Image" mode that enables flashing specific partitions by checking relevant boxes and selecting the corresponding file path. System Recovery

: Often used to "unbrick" devices that no longer boot or show a black screen. Specialized Options : Includes older options for flashing (Network File System) and

images, which were more common in earlier development stages of Rockchip devices. General Flashing Procedure

While specific steps can vary by device, the standard workflow for using this tool involves: Driver Installation : Install the Rockchip Driver Assistant

(often version 5.1.1 or similar) to ensure the PC recognizes the device. Loader Mode rk android tool v135

: Connect the device to the PC while holding a specific button (usually ) to enter "Loader Mode". Image Selection : Load the desired

file using the "Firmware" or "Path" buttons within the tool. (for full firmware) or (for partition flashing) to begin the process. Avalue Technology Important Considerations Risk of Bricking

: Flashing incorrect firmware or losing power during the process can permanently damage (brick) the device. Legacy Tool

: Version 1.35 is quite old; for newer Rockchip processors (like RK3568 or RK3399), developers typically use (v2.x or higher). Support Sites

: Information and firmware downloads for these tools are frequently found on community forums like XDA Developers Slatedroid Are you trying to recover a bricked device or just update to a newer Android version

The RK Android Tool v1.35 is a legacy utility used for flashing firmware, kernels, and boot images onto devices powered by Rockchip processors (such as the RK2918, RK3066, and RK3188). While newer versions like v2.x exist, v1.35 remains a specific requirement for many older "Android TV sticks" and early tablets. 🛠️ Core Functions

Firmware Flashing: Overwrites the system partitions with new ROMs. Rockchip Android Tool v1

Partition Management: Allows users to select specific components (Kernel, Boot, Recovery) to flash individually.

Device Interaction: Switches devices from "Normal Mode" to "Loader Mode" or "Maskrom Mode" for deep-level recovery.

IDB Operations: Erases or downloads the IDB (Initial Data Block), which is crucial when a device is "bricked" or stuck in a boot loop. 💡 Key Tips for Successful Use

Driver Installation: The tool will not "see" your device without the Rockchip USB Drivers. You must install these manually via the Windows Device Manager if the status bar at the bottom says "No Found RKAndroid rock usb."

The "Reset" Pin: Most Rockchip devices require you to hold a physical reset button (often inside a tiny hole) while plugging it into your PC to trigger Loader Mode.

Configuration Files: The setting.ini file in the tool's folder controls the language. If the tool opens in Chinese, look for Selected=1 and change it to Selected=2 to switch to English.

Run as Admin: Always right-click the .exe and select Run as Administrator to ensure it has permission to access the USB ports and system files. ⚠️ Common Pitfalls Simple interface – Basic grid showing partitions and

USB Port Power: These tools are sensitive to power drops. Use a motherboard port (on the back of a PC) rather than a front-panel port or a USB hub.

Image Pathing: Ensure there are no spaces or special characters in the folder path where your firmware files are stored. Move them to a simple directory like C:\RK_Firmware\.

Version Compatibility: If v1.35 fails to flash your device, it may be because your chip is too new. Try RKBatchTool or Android Tool v2.x for chips like the RK3288 or RK3399. If you'd like, I can help you find: The download link for the Rockchip USB drivers. Instructions for unbricking a specific device model.

A guide on how to backup your current firmware before flashing.

Here’s a brief review of the RK Android Tool v1.35 (often referred to as RKAndroidTool or RKBatchTool depending on the version, though v1.35 is typically the RKAndroidTool used for flashing firmware on Rockchip devices).

Pros

  • Simple interface – Basic grid showing partitions and file paths. Easy for experienced users.
  • Low-level flashing – Can write to raw NAND/eMMC, helpful for brick recovery.
  • Works without ADB – Device just needs to be detected via USB in boot ROM mode.
  • Supports multiple partitions – Bootloader, parameter, misc, kernel, boot, recovery, system, backup.
  • Lightweight – No installation required; runs directly as an .exe.

What is RK Android Tool v135?

RK Android Tool v135 (often abbreviated as "RKAndroidTool v1.35") is a Windows-based flashing utility developed by Rockchip Electronics. It is designed to communicate with Rockchip devices when they are in Mask ROM Mode or Loader Mode. The tool allows users to write raw firmware images (system, boot, recovery, kernel, and misc partitions) directly to the device’s NAND flash or eMMC storage.

Unlike over-the-air (OTA) updates, which only modify specific system partitions, RK Android Tool performs a low-level flash. This makes it indispensable for:

  • Unbricking devices stuck in a boot loop.
  • Restoring a device to its original stock firmware.
  • Upgrading from Android 7 to Android 10 (if the manufacturer provides images).
  • Repairing corrupted partition tables.

Step-by-Step: Flashing Firmware (Common Workflow)

  1. Install the RK Android Tool v135 and any required drivers on a Windows PC.
  2. Extract the firmware package and note the relevant image file(s).
  3. Launch the tool and choose the correct operation mode (e.g., "Upgrade" or "Flash").
  4. Load the firmware image(s) into the appropriate slots in the tool (system, boot, etc.).
  5. Connect the device in Loader/Preloader mode (often by holding a specific key combo while plugging USB).
  6. Confirm device is detected (check VID/PID/serial in the tool).
  7. Click "Start" or "Upgrade" and wait — do not disconnect the device.
  8. Verify completion status in the log; reboot device when finished.