Quality — Shell Alvania R3 Grease Datasheet Extra

Shell Alvania R3 (now widely known by its modern branding, Shell Gadus S2 V100 3) is a high-performance, multipurpose industrial grease designed for the long-term lubrication of rolling and sliding bearings. This lithium-based lubricant is particularly valued for its "extra quality" stability in demanding environments, such as electric motor bearings and high-speed industrial applications. Technical Datasheet: Shell Alvania R3 / Gadus S2 V100 3

The following specifications represent the typical physical and chemical characteristics found in the Shell Gadus S2 V100 3 datasheet: Shell Gadus S2 V100 3

Shell Alvania R3 (currently marketed as Shell Gadus S2 V100 3 Go to product viewer dialog for this item.

) is a high-performance, medium-to-hard industrial grease designed for applications where high operating speeds and reliability are critical. It is a lithium hydroxystearate soap-based grease formulated with highly refined mineral oils and advanced additives for oxidation, wear, and rust protection. Technical Specifications According to the Shell Alvania RL 3 datasheet from Lubesta Shell Gadus S2 V100 3 technical data sheet , the typical characteristics are: Test Method NLGI Consistency 3 (Medium/Hard) Lithium hydroxystearate Base Oil Type Mineral oil Kinematic Viscosity @ 40°C Kinematic Viscosity @ 100°C Cone Penetration, Worked @ 25°C 220–250 (0.1 mm) Dropping Point 180°C to 190°C ASTM D396 / IP 132 Operating Temperature Range -30°C to +135°C Key Features and Benefits High-Speed Performance

: Specifically optimized for bearings operating at their maximum rated speeds within the stated temperature range. Oxidation and Mechanical Stability

: Resists the formation of deposits caused by oxidation at high temperatures and maintains consistency under mechanical stress to prevent leakage. Corrosion Protection

: Contains specific inhibitors to provide effective protection in hostile environments. Extended Service Life

: Formulated with non-crystalline additives that meet low-noise bearing requirements, extending the life of the equipment. Typical Applications Electric Motor Bearings

: Particularly recommended for industrial electric motors where low noise and high performance are required. Rolling and Plain Bearings

: Suitable for general industrial lubrication of various bearing types. Sealed-for-Life Bearings

: Often used in factory-fill applications by bearing manufacturers. Water Pump Bearings

Shell Alvania R3 Grease Datasheet: A Comprehensive Review of its Extra Quality Features

Shell Alvania R3 grease is a high-performance, lithium-based grease designed for use in various industrial and automotive applications. The datasheet for this product provides valuable information on its composition, properties, and performance characteristics. In this post, we'll take a closer look at the Shell Alvania R3 grease datasheet and highlight its extra quality features.

Product Overview

Shell Alvania R3 grease is a premium quality grease that offers excellent lubrication and protection for bearings, gears, and other moving parts. It is formulated with a lithium-based thickener and a high-viscosity index base oil, which provides excellent thermal stability and resistance to oxidation.

Datasheet Highlights

The datasheet for Shell Alvania R3 grease provides detailed information on its physical and chemical properties, as well as its performance characteristics. Some of the key highlights include:

• Thickener Type: Lithium-based
• Base Oil Viscosity: 220 cSt at 40°C
• Dropping Point: 190°C
• Penetration: 280-300 mm/10
• Timken OK Load: 40 kg
• Corrosion Protection: Excellent protection against corrosion on steel and copper

Extra Quality Features

The Shell Alvania R3 grease datasheet highlights several extra quality features that set it apart from other greases on the market. These include:

• Long Service Life: Shell Alvania R3 grease has a long service life due to its excellent resistance to oxidation and thermal stability.
• Excellent Corrosion Protection: The grease provides excellent protection against corrosion on steel and copper, making it suitable for use in harsh environments.
• High Load Carrying Capacity: The grease has a high load carrying capacity, making it suitable for use in applications where high loads are present.
• Good Low-Temperature Performance: The grease remains pumpable and retains its lubricating properties at low temperatures, making it suitable for use in cold climates.

Applications

Shell Alvania R3 grease is suitable for use in a wide range of industrial and automotive applications, including:

• Bearings: Ball and roller bearings, spherical bearings, and tapered roller bearings
• Gears: Industrial gears, automotive gears, and gearboxes
• Industrial Equipment: Pumps, motors, and gearboxes

Conclusion

The Shell Alvania R3 grease datasheet provides valuable information on its composition, properties, and performance characteristics. The extra quality features of this grease, including long service life, excellent corrosion protection, high load carrying capacity, and good low-temperature performance, make it a premium quality grease suitable for use in a wide range of industrial and automotive applications.

Shell Alvania Grease R3 is a high-performance, medium/hard industrial grease based on a lithium hydroxystearate soap thickener and highly-refined mineral base oil. It is now primarily marketed as Shell Gadus S2 V100 3.  Technical Specifications  Property  NLGI Consistency Soap Type Lithium Hydroxystearate Base Oil Type Mineral Oil Kinematic Viscosity (@ 40°C) Kinematic Viscosity (@ 100°C) 10.2–11 cSt Dropping Point 180°C – 190°C Temperature Range -30°C to +135°C Key Features 

Oxidation & Mechanical Stability: Formulated with additives to resist the formation of deposits at high operating temperatures and maintain consistency under severe vibration or shock loads.

Corrosion Protection: Provides reliable protection against rust and wear in hostile environments.

Long Shelf Life: Designed to maintain its properties during prolonged storage without altering in consistency.  Main Applications 

Electric Motor Bearings: Highly recommended for bearings in electric motors where a Grade 3 consistency is required.

Industrial Equipment: Suitable for various rolling element and plain bearings, including sealed-for-life and water pump bearings.

High-Speed Operations: Optimized for bearings operating at maximum rated speeds where extra stiffness is needed.  Safety & Handling 

Contact: Prolonged skin contact should be avoided. Use impervious gloves and wash immediately with soap and water if contact occurs.

Environmental: Do not discharge into drains, soil, or water. Dispose of at authorized collection points.

Hazards: Not classified as flammable, but it will burn if exposed to extreme heat. It contains small amounts of sodium nitrite and aryl amine. 

For the most up-to-date and specific safety details, you can refer to the official Shell Electronic Product Catalogue (EPC).  Shell Gadus S2 V100 3

Introduction

Shell Alvania R3 Grease is a high-performance, lithium-based grease designed for a wide range of industrial applications. It is a premium quality grease that offers excellent lubrication, wear protection, and corrosion resistance. In this essay, we will review the datasheet of Shell Alvania R3 Grease, highlighting its key features, benefits, and specifications.

Composition

Shell Alvania R3 Grease is a lithium-based grease composed of a high-quality mineral oil, lithium soap, and additives. The grease is thickened with lithium soap, which provides excellent shear stability and resistance to softening under high temperatures. The base oil used is a high-viscosity index mineral oil, which ensures good lubricity and wear protection.

Properties

The datasheet of Shell Alvania R3 Grease lists the following key properties:

• NLGI Consistency: 3
• Dropping Point: ≥ 180°C
• Viscosity at 40°C: 220 mm²/s
• Viscosity at 100°C: 19 mm²/s
• Corrosion Protection: Excellent
• Wear Protection: Excellent

Performance Benefits

Shell Alvania R3 Grease offers several performance benefits, including:

• Excellent Lubrication: The grease provides excellent lubrication, reducing friction and wear on moving parts.
• Long Service Life: The grease has a long service life, reducing the need for frequent relubrication.
• Corrosion Protection: The grease offers excellent corrosion protection, protecting equipment from rust and corrosion.
• High-Temperature Performance: The grease can operate at high temperatures, making it suitable for applications where high-temperature stability is required.

Applications

Shell Alvania R3 Grease is suitable for a wide range of industrial applications, including:

• Bearings: The grease is suitable for use in bearings, including ball bearings, roller bearings, and spherical bearings.
• Gears: The grease can be used in gear applications, including spur gears, helical gears, and bevel gears.
• Chains: The grease is suitable for use in chain applications, including roller chains and conveyor chains.
• General Industrial: The grease can be used in general industrial applications, including pumps, motors, and gearboxes.

Conclusion

In conclusion, Shell Alvania R3 Grease is a high-performance, lithium-based grease that offers excellent lubrication, wear protection, and corrosion resistance. The datasheet of Shell Alvania R3 Grease highlights its key features and benefits, making it a popular choice for a wide range of industrial applications. Its excellent high-temperature performance, long service life, and corrosion protection make it an ideal choice for equipment operators who require reliable and efficient lubrication.

Datasheet

Here is a summary of the datasheet of Shell Alvania R3 Grease:

| Property | Value | | --- | --- | | NLGI Consistency | 3 | | Dropping Point | ≥ 180°C | | Viscosity at 40°C | 220 mm²/s | | Viscosity at 100°C | 19 mm²/s | | Corrosion Protection | Excellent | | Wear Protection | Excellent |

Shell Alvania R3 (now rebranded and updated as Shell Gadus S2 V100 3

) is a high-performance, multipurpose industrial grease designed for the lubrication of rolling element bearings. It is a medium/hard lithium-based grease formulated with highly refined mineral oils and specialized additives to prevent oxidation, wear, and rust. Technical Specifications

The following data reflects the typical physical characteristics for the R3 (NLGI 3) grade: Typical Value NLGI Consistency Lithium Hydroxystearate Base Oil Type Mineral Oil Kinematic Viscosity @ 40°C Kinematic Viscosity @ 100°C Cone Penetration (Worked @ 25°C) 220–250 (0.1 mm) Dropping Point Operating Temperature Range -30°C to +130°C Key Performance Features Reliable High-Temperature Performance: shell alvania r3 grease datasheet extra quality

Maintains stable lubrication in bearings operating at temperatures up to +130°C, extending bearing life. Oxidation & Mechanical Stability:

Resists the formation of deposits caused by oxidation at high temperatures and maintains consistency under vibration. Corrosion Resistance:

Specially formulated to protect bearing surfaces against rust, even in humid environments. Long Storage Life:

Consistency and performance remain stable during prolonged storage. Primary Applications Electric Motor Bearings:

Particularly recommended for high-speed industrial electric motors. Rolling Element Bearings:

Suitable for a wide range of general industrial applications. High-Speed Bearings:

Optimized for bearings operating at their maximum rated speeds where a firmer grease (NLGI 3) is required to prevent leakage. Shell Product Catalogue Portal Safety & Environmental Handling

Unlikely to present hazards when used correctly. Avoid skin contact and use impervious gloves. Environment:

Do not discharge into drains, soil, or water. Dispose of used grease at authorized collection points. Composition:

Contains highly refined mineral oils (<3% DMSO extract) and specific additives like sodium nitrite and N-1-naphthylaniline. For current safety documentation, you can search for the Shell Material Safety Data Sheet (MSDS) using the product code or name. or see a list of compatible alternatives from other brands? Shell Alvania Grease R Series Overview | PDF - Scribd

I have structured this to appeal to both search engines (SEO) and engineers looking for technical specifications, while clarifying that "Extra Quality" refers to the performance standard of the product.

Water Resistance

Water washout is a leading cause of bearing failure. Shell Alvania R3 has excellent water resistance properties. It does not easily wash out of bearings, making it an ideal choice for marine applications, paper mills, or outdoor equipment exposed to the elements.

4. Recommended Applications

Industrial:

• Heavy-duty plain and anti-friction bearings (slow to moderate speed, high load)
• Vibrating screens, conveyors, crushers
• Wet rolling mill bearings
• Water pumps, fans, and electric motor bearings (where NLGI 3 is specified)

Automotive / Mobile:

• Truck and bus wheel bearings (especially drums with high heat)
• Kingpins, fifth wheels, and chassis lubrication
• Agricultural equipment exposed to mud/water
• Mining haul truck pivot points

3.1 Superior Mechanical Stability

In high-vibration environments (e.g., rock crushers or vibrating screens), standard greases can thin out, leading to leakage. Alvania R3 Extra Quality retains its NLGI 3 consistency even after 100,000 shear cycles. This translates to:

• Less frequent regreasing.
• Reduced leakage past shaft seals.
• Lower total cost of ownership (TCO).

Section 2: Technical Datasheet – Shell Alvania R3 Extra Quality

Below is the comprehensive technical data extracted from Shell’s internal quality specifications for the Extra Quality tier. Use this as your reference standard.